Journal Of Environmental Monitoring[JOURNAL]
Sun
200 papers
Prioritizing GM crop monitoring sites in the dynamics of cultivation systems and their environment.
Bethwell C, Müller HJ, Eulenstein F … +1 more , Graef F
J Environ Monit · 2012 May · PMID 22495474 · Publisher ↗
EU legislation stipulates that GM crops have to be monitored for potential adverse environmental effects. Monitoring preferably should take place in the most exposed areas-the cultivated fields and their neighbouring env...
EU legislation stipulates that GM crops have to be monitored for potential adverse environmental effects. Monitoring preferably should take place in the most exposed areas-the cultivated fields and their neighbouring environment. Current monitoring designs do not give detailed consideration to the different exposure intensities in agricultural practice. At the same time, the selection of specific, more exposed sites is difficult considering the dynamic and diversity of crop cultivation and rotation systems and their environments. We developed an approach for prioritising the monitoring of on-farm and neighbouring sites based on differing exposure levels using a minimum dataset of cultivation and land use information. Applying a Bt-maize cultivation scenario to Brandenburg, Germany, where presently no GM crops are cultivated, we systemised and categorised areas with different spatio-temporal exposure intensities including 50 m, 200 m and 1000 m buffers. These categories correspond to different suitabilities to serve as monitoring sites. Sites are prioritised using a sequential scheme. This yields an improved and objective spatial monitoring design providing detailed exposure information. This methodology is flexible and transferable to any agricultural setting, therefore enabling superior statistical comparisons between locations and regions and thus enhancing monitoring data quality.
Effects of natural organic matter type and concentration on the aggregation of citrate-stabilized gold nanoparticles.
Nason JA, McDowell SA, Callahan TW
J Environ Monit · 2012 Jul · PMID 22495395 · Publisher ↗
The aggregation of 12 nm citrate-stabilized gold nanoparticles (cit-AuNPs) in the presence of four different natural organic matter (NOM) isolates and a monovalent electrolyte (KCl) was evaluated using time-resolved dyna...
The aggregation of 12 nm citrate-stabilized gold nanoparticles (cit-AuNPs) in the presence of four different natural organic matter (NOM) isolates and a monovalent electrolyte (KCl) was evaluated using time-resolved dynamic light scattering. All four NOM isolates stabilized the cit-AuNPs with respect to aggregation. However, specific effects varied among the different NOM isolates. At pH = 6 in 80 mM KCl, low concentrations (<0.25 mg C per L) of large molecular weight Suwannee River Humic Acid (SRHA) was required to stabilize cit-AuNPs, while larger concentrations (>2 mg C per L) of smaller Suwannee River Fulvic Acid (SRFA) were necessary at the same ionic strength. Suwannee River NOM (SRNOM) which contains both SRHA and SRFA behaved in a manner intermediate between the two. Pony Lake Fulvic Acid (PLFA), an autochthonous NOM isolate, provided substantial stability at low concentrations, yet aggregation was induced at NOM concentrations > 2 mg C per L, a trend that is hypothesized to be the result of favourable hydrophobic interactions between coated particles induced at increased surface coverage. For all NOM isolates, it appears that NOM adsorption or conformational changes at the AuNP surfaces result in significant increases in the hydrodynamic diameter that aren't attributable to NP-NP aggregation.
Acidification in Arabian Gulf--insights from pH and temperature measurements.
Uddin S, Gevao B, Al-Ghadban AN … +2 more , Nithyanandan M, Al-Shamroukh D
J Environ Monit · 2012 May · PMID 22491783 · Publisher ↗
The detrimental effects of increasing atmospheric levels of carbon dioxide (CO(2)) and other greenhouse gases since the industrial revolution has led to a concerted international effort to control their release and abate...
The detrimental effects of increasing atmospheric levels of carbon dioxide (CO(2)) and other greenhouse gases since the industrial revolution has led to a concerted international effort to control their release and abate the environmental and human health impacts. CO(2) is removed from the atmosphere by photosynthesis of plants in the terrestrial environment and by aquatic sequestration. In the Middle East and other arid countries, terrestrial removal is minimal. The most likely removal pathway for CO(2) in arid regions around the world is by aquatic sequestration. In the Middle East the major sink is the Arabian Gulf which leads to acidification of the marine environment. Biweekly pH concentration measurements in surface waters of the northern Arabian Gulf over a four year period in this study suggest that the Arabian Gulf waters are becoming increasingly acidic with time. Supporting evidence for increased CO(2) sequestration comes from increased marine primary productivity over the past decade. Biological effects, such as coral bleaching, observed during this period suggest that urgent action is required to reverse the trend and protect marine life. The data highlight the fact that this semi-enclosed sea is undergoing a rapid degradation which may affect the oceanic chemistry and biogeochemical cycle much earlier than predicted for most oceanic waters.
Oxidation of Cr(III) to Cr(VI) during chlorination of drinking water.
Lindsay DR, Farley KJ, Carbonaro RF
J Environ Monit · 2012 Jul · PMID 22487808 · Publisher ↗
Drinking water treatment typically uses strong oxidants such as chlorine which are capable of converting Cr(III) to Cr(VI). The rates and extent of Cr(III) oxidation by chlorine are not well established. Cr(III) oxidatio...
Drinking water treatment typically uses strong oxidants such as chlorine which are capable of converting Cr(III) to Cr(VI). The rates and extent of Cr(III) oxidation by chlorine are not well established. Cr(III) oxidation experiments were therefore conducted in distilled deionized water and New York City tap water dosed initially with Cr(III) and supplemented with sodium hypochlorite to increase free chlorine residual. Reaction progress was monitored using capillary electrophoresis which quenched reactions and allowed for quantification of Cr(VI). Three different forms of Cr(III) were used as reactants: a Cr(III) nitrate salt, Cr(III)-EDTA, and Cr(III) hydroxide. Rates of Cr(VI) production for all three forms of Cr(III) were rapid, on the order of hours. However, oxidation rates slowed and a plateau in Cr(VI) concentrations was reached. This resulted in less than 100% conversion of Cr(III) to Cr(VI) even at relatively high chlorine doses (10 to 100 mg L(-1) as Cl(2)). The loss of free chlorine due to a non-Cr chlorine demand, the precipitation of Cr(III) to Cr(OH)(3)(s), and the partial oxidation of Cr(III) to intermediate oxidation states (i.e. Cr(IV) and Cr(V)) were examined and eliminated as possible explanations for this behavior. Consumption of chlorine via reaction with intermediate oxidation states of Cr is therefore offered as a possible explanation for the plateau in Cr(VI) concentrations.
Hydrology-linked spatial distribution of pesticides in a fjord system in Greenland.
Carlsson P, Cornelissen G, Bøggild CE … +3 more , Rysgaard S, Mortensen J, Kallenborn R
J Environ Monit · 2012 May · PMID 22481207 · Publisher ↗
A pilot study is presented evaluating selected chlorinated pesticides as chemical tracers for water masses in a sub-Arctic fjord system (Godthåbsfjord, western Greenland). Polyoxymethylene (POM) based passive water sampl...
A pilot study is presented evaluating selected chlorinated pesticides as chemical tracers for water masses in a sub-Arctic fjord system (Godthåbsfjord, western Greenland). Polyoxymethylene (POM) based passive water samplers were deployed during summer-autumn 2010. The levels of the analysed chlorinated pesticides in the fjord surface waters were found to be low compared to earlier studies. α-Hexachlorocyclohexane (α-HCH) and hexachlorobenzene (HCB) were the predominant contaminants. However, these two compounds have higher levels in oceanic water compared to freshwater influenced fjord waters. These chemicals can thus be considered as indicators for direct atmospheric long-range transport, while the organochlorine pesticides like trans-, cis-chlordane, trans-nonachlor and oxychlordane that are detected in the inner parts of the fjord are indicators for potential freshwater sources such as rivers and glacial meltwater runoff (secondary sources). The average values were 50 pg L(-1) for HCB and 11 pg L(-1) for α-HCH. These concentrations are comparable to levels in fjords in Svalbard (Norwegian Arctic), but lower than in open and/or ice covered oceans in the Canadian Arctic. Two air samplers were deployed for the identification of direct atmospheric contributions. Local contamination sources do not contribute significantly. The study demonstrated the value of passive water sampling devices for comprehensive hydrological characterization of Arctic coastal waters.
Analysis of the usefulness of biological parameters for the control of activated sludge wastewater treatment plants in an interlaboratory study context.
Arregui L, Liébana R, Rodríguez E … +4 more , Murciano A, Conejero F, Pérez-Uz B, Serrano S
J Environ Monit · 2012 May · PMID 22481149 · Publisher ↗
The quality of the sludge in Wastewater Treatment Plants (WWTPs) depends on the suitable colonization of the flocs by microorganisms. Due to the functional importance of these biological constituents, several biological...
The quality of the sludge in Wastewater Treatment Plants (WWTPs) depends on the suitable colonization of the flocs by microorganisms. Due to the functional importance of these biological constituents, several biological or biological-related parameters have been commonly used for the control of depuration efficiency. According to national and international water regulation recommendations, interlaboratory studies have a great relevance to determine which parameters are more reliable for their extensive application in routine control. However, these studies are also very useful to demonstrate consistency in results from multiple laboratories and to develop reliable and reproducible methodologies which might be necessary for protocol validation and also for accreditation issues to meet regulatory environmental requirements. The main purpose of this work was to assess the results obtained in consecutive interlaboratory assays in order to determine the concordance degree in the application of biological parameters by participating laboratories. Following the international recommendations about these studies, a common working protocol was proposed. Statistical tests indicated that Sludge Index and several routine physical-chemical analyses [V30, Mixed Liquor Suspended Solids (MLSS), Mixed Liquor Volatile Solids (MLVS) and Sludge Volumetric Index (SVI)] show low variability and therefore are suitable tools for laboratory control. Shannon Index and Sludge Biotic Index also presented low variability although a more precise protocol would be necessary, in particular the methodology to count small flagellates. The abundance and identification of protist species showed low concordance among laboratories and three factors were responsible for the low reliability of data: population density, size and morphological distinguishable characters of the specimens.
Aerosol residence times and changes in radioiodine-131I and radiocaesium-137 Cs activity over Central Poland after the Fukushima-Daiichi Nuclear reactor accident.
Długosz-Lisiecka M, Bem H
J Environ Monit · 2012 May · PMID 22481111 · Publisher ↗
The first detectable activities of radioiodine (131)I, and radiocaesium (134)Cs and (137)Cs in the air over Central Poland were measured in dust samples collected by the ASS-500 station in the period of 21(st) to 24(th)...
The first detectable activities of radioiodine (131)I, and radiocaesium (134)Cs and (137)Cs in the air over Central Poland were measured in dust samples collected by the ASS-500 station in the period of 21(st) to 24(th) of March, 2011. However, the highest activity of both fission products, (131)I and (137)Cs: 8.3 mBq m(-3) and 0.75 mBq m(-3), respectively, were obtained in the samples collected on 30(th) March, i.e.∼18 days after the beginning of the fission products' discharge from the damaged units of the Fukushima Daiichi Nuclear Power Plant. The simultaneously determined corrected aerosol residence time for the same samples by (210)Pb/(210)Bi and (210)Pb/(210)Po methods was equal to 10 days. Additionally, on the basis of the activity ratio of two other natural cosmogenic radionuclides, (7)Be and (22)Na in these aerosol samples, it was possible to estimate the aerosol residence time at ∼150 days for the solid particles coming from the stratospheric fallout. These data, as well as the differences in the activity size distribution of (7)Be and (131)I in the air particulate matter, show, in contrast to the Chernobyl discharge, a negligible input of stratospheric transport of Fukushima-released fission products.
Effectiveness of three configurations of membrane bioreactors on the removal of priority and emergent organic compounds from wastewater: comparison with conventional wastewater treatments.
Camacho-Muñoz D, Martín J, Santos JL … +5 more , Alonso E, Aparicio I, De la Torre T, Rodriguez C, Malfeito JJ
J Environ Monit · 2012 May · PMID 22476254 · Publisher ↗
In this work the effectiveness of membrane bioreactors as advanced treatment on the removal of emergent and priority organic compounds in wastewater treatment plants has been evaluated during a one-year monitoring study....
In this work the effectiveness of membrane bioreactors as advanced treatment on the removal of emergent and priority organic compounds in wastewater treatment plants has been evaluated during a one-year monitoring study. The studied wastewater treatment plant operates with flat sheet and hollow fibre membranes in two parallel lines. Moreover, a reverse osmosis module connected in series after the hollow fibre membrane was evaluated for one month. Comparison of membrane bioreactor and conventional activated sludge treatment was also investigated, as well as the influence of the physicochemical properties of the compounds on the removal rates achieved. Sixteen pharmaceutical compounds belonging to seven therapeutic groups and eight priority organic pollutants, including linear alkylbenzene sulfonates, nonylphenol and its ethoxylates and phthalate, were monitored. The highest mean concentrations corresponded to priority organic pollutants (309 μg L(-1) of linear alkylbenzene sulfonate C(12)) followed by pharmaceutical compounds (24.5 μg L(-1) of ibuprofen). No significant difference of effectiveness was found among flat sheet and hollow fibre membranes. However, an improvement was obtained with the addition of a reverse osmosis module for most of the compounds. Biodegradation has been shown as the main route involved in the removal of organic compounds during both technologies.
Development and preparation of lead-containing paint films and diagnostic test materials.
Binstock D, Gutknecht W, Sorrell K … +6 more , Haas C, Winstead W, McCombs M, Brown G, Salmons C, Harper SL
J Environ Monit · 2012 May · PMID 22460838 · Publisher ↗
Lead in paint continues to be a threat to children's health in cities across the United States, which means there is an ongoing need for testing and analysis of paint. This ongoing analytical effort and especially develo...
Lead in paint continues to be a threat to children's health in cities across the United States, which means there is an ongoing need for testing and analysis of paint. This ongoing analytical effort and especially development of new methods continue to drive the need for diagnostic testing materials that provide the analytical challenges of real-world paints. To this end, 31 different types of paint test materials were developed and prepared. Preparation of the materials included development of lead-containing paint films yielding an overall relative standard error for one individual test sample being less than 10%. The 31 diagnostic test materials prepared with these paint films included two lead pigments; lead concentrations from nominally 0 to 2.0 mg lead/cm(2) (0 to 5% lead by weight); overlayers of both "lead-free," oil-based and water-based paints; Al, Ba, and Mg as potential chemical interferents; red and black potential color interferents; and substrates of wood, metal, masonry, and plaster. These materials challenge each step in method development and evaluation, including paint sample collection and preparation, lead extraction, and measurement of solubilized lead. When the materials were used to test performance of a new lead-in-paint testing method based on extraction using a rotor/stator method and measurement using turbidimetry, the results agreed to within ±20% of the expected lead values for 30 out of 31 of the diagnostic test materials, thereby demonstrating their levels of quality and utility.
Radioactive fallout in the United States due to the Fukushima nuclear plant accident.
Thakur P, Ballard S, Nelson R
J Environ Monit · 2012 May · PMID 22456673 · Publisher ↗
The release of radioactivity into the atmosphere from the damaged Fukushima Daiichi nuclear power plant started on March 12th, 2011. Among the various radionuclides released, iodine -131 ((131)I) and cesium isotopes ((13...
The release of radioactivity into the atmosphere from the damaged Fukushima Daiichi nuclear power plant started on March 12th, 2011. Among the various radionuclides released, iodine -131 ((131)I) and cesium isotopes ((137)Cs and (134)Cs) were transported across the Pacific Ocean and reached the United States on 17-18 March 2011. Consequently, an elevated level of fission products (131)I, (132)I, (132)Te, (134)Cs and (137)Cs were detected in air, water, and milk samples collected across the United States between March 17 and April 4, 2011. The continuous monitoring of activities over a period of 25 days and spatial variations across more than 100 sampling locations in the United States made it possible to characterize the contaminated air masses. For the entire period, the highest detected activity values ranged from less than 1 m Bq m(-3) to 31 m Bq m(-3) for the particulate (131)I, and up to 96 m Bq m(-3) for the gaseous (131)I fraction.
Assessment of particulate matter in the urban atmosphere: size distribution, metal composition and source characterization using principal component analysis.
Onat B, Alver Şahin Ü, Bayat C
J Environ Monit · 2012 May · PMID 22454094 · Publisher ↗
In this study, the size distribution of airborne particles and related heavy metals Co, Cd, Sn, Cu, Ni, Cr, Pb and V in two urban areas in Istanbul: Yenibosna and Goztepe, were examined. The different inhalable particles...
In this study, the size distribution of airborne particles and related heavy metals Co, Cd, Sn, Cu, Ni, Cr, Pb and V in two urban areas in Istanbul: Yenibosna and Goztepe, were examined. The different inhalable particles were collected by using a cascade impactor in eight size fractions (<0.4 μm, 0.4-0.7 μm, 1.1-2.1 μm, 2.1-3.3 μm, 3.3-4.7 μm, 4.7-5.8 μm, 5.8-9 μm and >9 μm) for six months at each station. Samples were collected on glass fiber filters and filters were extracted and analyzed using ICP-MS. Log-normal distributions showed that the particles collected at the Yenibosna site have a smaller size compared to the Goztepe samples and the size distribution of PM was represented the best by the tri-modal. The average total particle concentrations and standard deviations were obtained as 67.7 ± 17.0 μg m(-3) and 82.1 ± 21.2 μg m(-3), at the Yenibosna and Göztepe sites, respectively. The higher metal rate in fine and medium coarse PM showed that the anthropogenic sources were the most significant pollutant source. Principal component analysis identified five components for PM namely traffic, road dust, coal and fuel oil combustion, and industrial.
Chironomid mouthpart deformities as indicator of environmental quality: a case study in Lake Trasimeno (Italy).
Di Veroli A, Selvaggi R, Goretti E
J Environ Monit · 2012 May · PMID 22453512 · Publisher ↗
The aim of the present study was to monitor mouthpart deformities of Chironomus plumosus (Insecta-Diptera) in Lake Trasimeno (2000-2010) in relation with sediment contamination by heavy metals, which is one of the main c...
The aim of the present study was to monitor mouthpart deformities of Chironomus plumosus (Insecta-Diptera) in Lake Trasimeno (2000-2010) in relation with sediment contamination by heavy metals, which is one of the main causes of deformity induction. In Lake Trasimeno, concentrations of heavy metals in the investigated littoral zone were low, in comparison with those of the central area. By contrast, the incidence of deformities was much higher in the littoral station (2006-2009) than in the central area. In the littoral zone, the deformities progressively decreased and by 2010 reached values similar to those observed in the central area (2000-2002, 2010). This decrease was mainly due to the reduction of severe deformities, thus indicating an environmental quality recovery of this littoral sector. Chemical analysis revealed that the higher incidence of deformities in the littoral zone was not caused by heavy metal contamination, unless they may have contributed to a joint action with other toxicants. The present study on Lake Trasimeno provided additional evidence that chironomid mouthpart deformities can be used in biomonitoring programs to evaluate sediment contamination by toxicants. Since mouthpart deformities may also be induced by compounds not included in routine chemical analyses, they may better reflect sediment quality than chemical analysis alone.
Do national advisories serve local consumers: an assessment of mercury in economically important North Carolina fish.
Petre SJ, Sackett DK, Aday DD
J Environ Monit · 2012 May · PMID 22453298 · Publisher ↗
Consumption of marine fish provides both benefits (lean protein, omega-3 fatty acids and essential nutrients) and risks (main source of mercury (Hg) exposure for humans). Mercury is a potent neurotoxin and the source of...
Consumption of marine fish provides both benefits (lean protein, omega-3 fatty acids and essential nutrients) and risks (main source of mercury (Hg) exposure for humans). Mercury is a potent neurotoxin and the source of more fish advisories nationwide than any other toxicant. Despite the widespread nature of Hg, it is unknown whether local Hg contamination reflects national and regional levels often used as bases to inform consumers of potential fish consumption risk. Thus, the objectives of our study were to examine Hg levels of six commonly consumed marine species harvested locally off the North Carolina coast and to compare our results to published regional (Monterey Bay Aquarium's Seafood Watch List) and national (Environmental Protection Agency, EPA, and Food and Drug Administration, FDA) Hg averages, action levels, and guidelines. We found significant differences in Hg concentrations among collected species, and we identified correlations between Hg concentration and fish length and trophic levels. Collected mahi mahi and triggerfish were below the EPA fish tissue action level (0.3ppm). Wahoo and grouper exceeded the EPA action level but were below the FDA action level (1.0ppm). King mackerel had the highest Hg concentration among targeted species, exceeding both EPA and FDA action levels. Further, our local results were not always consistent with calculated averages from EPA and FDA databases for the same species, and although many of our findings were consistent with Monterey Bay Aquarium's Seafood Watch List (southeast region), recommendations based on Hg levels would conflict with recommendations they provide based on sustainability. We find regional and national averages are not always reflective of local Hg contamination and suggest local data may be needed to accurately assess consumer risk.
Ecological risk assessment of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS) in marine environment using Isochrysis galbana, Paracentrotus lividus, Siriella armata and Psetta maxima.
Mhadhbi L, Rial D, Pérez S … +1 more , Beiras R
J Environ Monit · 2012 May · PMID 22446617 · Publisher ↗
Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) are anthropogenic substances classified as persistent bioaccumulative compounds and are found in various environmental compartments throughout the wo...
Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) are anthropogenic substances classified as persistent bioaccumulative compounds and are found in various environmental compartments throughout the world, from industrialized regions to remote zones far from areas of production. In this study, we assessed the effects of PFOA and PFOS on early life stages of marine test species belonging to three different trophic levels: one microalga (Isochrysis galbana), a primary consumer (Paracentrotus lividus) and two secondary consumers (Siriella armata and Psetta maxima). Acute EC(50) values for PFOS were 0.11 mg L(-1) in P. maxima, 6.9 mg L(-1) in S. armata, 20 mg L(-1) in P. lividus and 37.5 mg L(-1) in I. galbana. In the case of PFOA, the toxicity was lower but the ranking was the same; 11.9 mg L(-1) in P. maxima, 15.5 mg L(-1) in S. armata, 110 mg L(-1) in P. lividus and 163.6 mg L(-1) in I. galbana. The Predicted No Effect Concentration (PNEC) for PFOS and PFOA in marine water derived from these acute toxicity values are 1.1 μg L(-1) for PFOS and 119 μg L(-1) for PFOA. This study established a baseline dataset of toxicity of PFOS and PFOA on saltwater organisms. The data obtained suggest that PFOA pose a minor risk to these organisms through direct exposure. In the perspective of risk assessment, early life stage (ELS) endpoints provide rapid, cost-effective and ecologically relevant information, and links should be sought between these short-term tests and effects of long-term exposures in more realistic scenarios.
In situ phytoremediation of a soil historically contaminated by metals, hydrocarbons and polychlorobiphenyls.
Doni S, Macci C, Peruzzi E … +3 more , Arenella M, Ceccanti B, Masciandaro G
J Environ Monit · 2012 May · PMID 22446585 · Publisher ↗
In the past several years, industrial and agricultural activities have led to serious environmental pollution, resulting in a large number of contaminated sites. As a result, much recent research activity has focused on...
In the past several years, industrial and agricultural activities have led to serious environmental pollution, resulting in a large number of contaminated sites. As a result, much recent research activity has focused on the application of bioremediation technologies as an environmentally friendly and economically feasible means for decontamination of polluted soil. In this study horse manure and Populus nigra (var. italica) (HM + P treatment) have been used, at real scale level, as an approach for bioremediation of a soil historically contaminated by metals (Pb, Cr, Cd, Zn, Cu and Ni) and organic contaminants, such as polychlorobiphenyls and petroleum hydrocarbon. After one year, the HM + P phytotreatment was effective in the reclamation of the polluted soil from both organic and inorganic contaminants. A reduction of about 80% in total petroleum hydrocarbon (TPH), and 60% in polychlorobiphenyls (PCBs) and total metals was observed in the HM + P treatment. In contrast, in the horse manure (HM) treatment, used as control, a reduction of only about 30% of TPH was obtained. In order to assess both effectiveness and evolution of the remediation system to a biologically active soil ecosystem, together with the pollution parameters, the parameters describing the evolution of the soil functionality (enzymatic activities and protein SDS-PAGE pattern) were investigated. A stimulation of the metabolic soil processes (increase in dehydrogenase activity) was observed in the HM + P compared to the HM treatment. Finally, preliminary protein SDS-PAGE results have permitted the identification of proteins that have been recovered in the HM + P soil with respect to the HM; this may become a basic tool for improving the biogeochemical status of soil during the decontamination through the identification of microbial populations that are active in soil decontamination.
Impact of wastewater treatment plant discharge of lidocaine, tramadol, venlafaxine and their metabolites on the quality of surface waters and groundwater.
Rúa-Gómez PC, Püttmann W
J Environ Monit · 2012 May · PMID 22446514 · Publisher ↗
The presence of the anesthetic lidocaine (LDC), the analgesic tramadol (TRA), the antidepressant venlafaxine (VEN) and the metabolites O-desmethyltramadol (ODT) and O-desmethylvenlafaxine (ODV) was investigated in wastew...
The presence of the anesthetic lidocaine (LDC), the analgesic tramadol (TRA), the antidepressant venlafaxine (VEN) and the metabolites O-desmethyltramadol (ODT) and O-desmethylvenlafaxine (ODV) was investigated in wastewater treatment plant (WWTP) effluents, in surface waters and in groundwater. The analytes were detected in all effluent samples and in only 64% of the surface water samples. The mean concentrations of the analytes in effluent samples from WWTPs with wastewater from only households and hospitals were 107 (LDC), 757 (TRA), 122 (ODT), 160 (VEN) and 637 ng L(-1) (ODV), while the mean concentrations in effluents from WWTPs treating additionally wastewater from pharmaceutical industries as indirect dischargers were for some pharmaceuticals clearly higher. WWTP effluents were identified as important sources of the analyzed pharmaceuticals and their metabolites in surface waters. The concentrations of the compounds found in surface waters ranged from <LOQ to 176 (LDC), 381 (TRA), 261 (ODT), 122 (VEN) and 743 ng L(-1) (ODV) and were dependent on the concentrations of the compounds in the WWTP effluents, the proportion of wastewater in the recipient water, the mean flow rate of the surface water, and the proximity of the sampling point to the WWTP discharge point. The dependence of the concentrations of the target compounds in the surface water on the distance between the sampling points and the points of WWTP discharge into the recipient rivers and streams indicates possible degradation of the compounds in the surface waters. Infiltration of the target analytes into groundwater was not observed.
Designing an integrated environmental monitoring plan for land-based marine fish farms located at exposed and hard bottom coastal areas.
Carballeira C, Ramos-Gómez J, Martín-Díaz ML … +2 more , DelValls TA, Carballeira A
J Environ Monit · 2012 May · PMID 22441808 · Publisher ↗
The increase in aquaculture activities in the last few decades has not been accompanied by a corresponding increase in environmental controls and regulations. In this context, the application of environmental monitoring...
The increase in aquaculture activities in the last few decades has not been accompanied by a corresponding increase in environmental controls and regulations. In this context, the application of environmental monitoring plans (EMPs) has become necessary to assess the environmental impact associated with fish farming wastes. The objective of this review paper is to evaluate the suitability of experimental and analytical procedures as monitoring tools for inclusion in EMPs for intensive land-based marine fish farms (LBMFFs). The strong hydrodynamics and, in particular, the lack of sediment on the rocky coasts where LBMFFs are usually located, greatly limit the monitoring tools that can be used. We propose EMPs that employ a weight-of-evidence approach to evaluate: contamination, trophic and toxic effects, and ecological integrity. Laboratory tests, in situ bioassays and field surveys of local species are presented as key tools for assessing the impact of LBMFFs on ecosystems. The δ(15)N signal along a spatial gradient is proposed for evaluating exposure to contaminants. Trophic effects can be determined by growth of transplanted macro- and microalgae. Toxic effects can be evaluated by responses at different levels of biological organization, including biochemical and histological changes, physiological alterations and survival, in species from different trophic levels. Fouling tests and analysis of community structures are recommended for assessing ecological integrity. This review contributes to the development of environmental controls for intensive LBMFFs, and for other activities that discharge wastewater to rocky shores.
Seasonal variation, sources, and gas/particle concentrations of PCBs and OCPs at high altitude suburban site in Western Black Sea Region of Turkey.
Yenisoy-Karakaş S, Öz M, Gaga EO
J Environ Monit · 2012 May · PMID 22441172 · Publisher ↗
Daily gas and particle phase samples were collected during winter and summer seasons in Bolu, which is located in the high altitude Western Black Sea Region of Turkey. Samples were analyzed to determine the concentration...
Daily gas and particle phase samples were collected during winter and summer seasons in Bolu, which is located in the high altitude Western Black Sea Region of Turkey. Samples were analyzed to determine the concentrations of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). Concentrations of endosulfan sulfate and methoxychlor were found to be highest in the summer and winter periods, respectively. The measured average concentration of endrin was considerably higher (10-50 fold) than the values reported in the literature for similar sites. The agricultural areas located to the south, south-east and south-west of the sampling point were identified as source regions. PCBs were found predominantly in the gas phase in both seasons and 3-chlorinated biphenyls were found to be abundant in the winter period, due to pollutants transported from the city centre and a waste incineration plant by southerly and easterly winds. The concentrations of PCB-180 and PCB-194 were found to be higher than values reported in the literature. The correlation between atmospheric concentrations and temperature was obtained by using Clausius-Clapeyron (CC) plots. The CC plots for most of the OCPs showed shallow negative slopes with low r(2) values, which might be due to the presence of local sources, i.e., agricultural areas around the sampling site and the dominance of evaporation. The CC plots showed steep positive slopes for most of the PCB compounds. Most of the PCB compounds were carried from the ongoing local sources.
Errors in ozone risk assessment using standard conditions for converting ozone concentrations obtained by passive samplers in mountain regions.
Gerosa G, Finco A, Marzuoli R … +2 more , Ferretti M, Gottardini E
J Environ Monit · 2012 May · PMID 22441142 · Publisher ↗
Passive samplers are often employed to measure ozone concentrations in remote areas such as mountain forests. The potential ozone risk for vegetation is then assessed by calculating the AOT40 exposure index (accumulated...
Passive samplers are often employed to measure ozone concentrations in remote areas such as mountain forests. The potential ozone risk for vegetation is then assessed by calculating the AOT40 exposure index (accumulated hourly ozone concentration exceedances above 40 ppb, i.e. AOT40 = Σ([O(3)] - 40)Δt for any hourly ozone concentration [O(3)] > 40 ppb). AOT40 is customary calculated on the basis of ozone concentrations expressed as a volumetric mixing ratio, while lab sheets normally report ozone concentrations from passive samplers in mass units per cubic metre. Concentrations are usually converted from mass units to ppb using a standard conversion factor taking SATP (Standard Ambient Temperature and Pressure) conditions into account. These conditions, however, can vary considerably with elevation. As a consequence, the blanket application of a standard conversion factor may lead to substantial errors in reporting and mapping ozone concentrations and therefore in assessing potential ozone risk in mountain regions. In this paper we carry out a sensitivity analysis of the effects of uncertainties in estimations of air temperature (T) and atmospheric pressure (P) on the concentration conversion factor, and present two examples from two monitoring and mapping exercises carried out in the Italian Alps. We derived P and T at each site from adiabatic lapse rates for temperature and pressure and analysed the magnitude of error in concentration estimations. Results show that the concentration conversion is much more sensitive to uncertainties in P gradient estimation than to air temperature errors. The concentration conversion factor (cf) deviates 5% from the standard transformation at an elevation of 500 m asl. As a consequence, the standard estimated AOT40 at this elevation is about 13% less than the actual value. AOT40 was found to be underestimated by an average between 25% and 34% at typical elevations of mountain forest stands in the Italian Alps when a correct conversion factor for transforming ozone concentrations from μg m(-3) to ppb is not applied.
Gene-TEQ--a standardized comparative assessment of effects in the comet assay using genotoxicity equivalents.
Fassbender C, Braunbeck T, Keiter SH
J Environ Monit · 2012 May · PMID 22441078 · Publisher ↗
Existing methods for the comparison of genotoxic effects in the comet assay bear considerable disadvantages such as the problem to link information about concentration dependence and severity of effects. Moreover, given...
Existing methods for the comparison of genotoxic effects in the comet assay bear considerable disadvantages such as the problem to link information about concentration dependence and severity of effects. Moreover, given the lack of standardized protocols and the use of various standards, it may be extremely difficult to compare different studies. In order to provide a method for standardized comparative assessment of genotoxic effects, the concept of genotoxicity equivalents (Gene-TEQ) was developed. As potential reference compounds for genotoxic effects, three directly acting (N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), methyl-methanesulfonate, and N-methyl-N-nitrosourea) and three indirectly acting (cyclophosphamide, dimethylnitrosamine, and 4-nitroquinoline-oxide) genotoxic substances were compared with respect to their cytotoxic (neutral red) and genotoxic (comet assay) concentration-response profiles in the permanent fish cell line RTL-W1. For further comparison, two sediment extracts from the upper Danube River were investigated as environmental samples. Based on the results of cytotoxicity and genotoxicity testing, MNNG was selected as the reference compound. At several exposure levels and durations, genotoxic effects of both the other pure substances and the environmental samples were calculated as percentages of the maximum MNNG effect and related to the absolute MNNG effect (EC values). Thus, genotoxicity equivalent factors (Gene-TEQs) relative to MNNG could be calculated. Gene-TEQs can easily be applied to pure substances, mixtures and field samples to provide information about their toxicity relative to the reference compound. Furthermore, the Gene-TEQ concept allows a direct comparison of environmental samples from different laboratories.
About
- Frequency
- Sun
- Papers found
- 200
- RSS feed
- Subscribe